DMX Booster / Splitter 3402B-H

[restabs alignment=”osc-tabs-left” responsive=”true” icon=”true” tabcolor=”#cccccc” tabheadcolor=”#ffffff” seltabcolor=”#cd2628″ tabhovercolor=”#707070″]
[restab title=”DEUTSCH” active=”active”]

dmx booster splitter 3402b-h

Der 3402B-H ist ein DMX Splitter für Montage auf DIN-Normtragschiene 35mm (“Hutschiene”) und eignet sich zur Montage in Schaltanlagen. Elektrisch verfügt der DMX Splitter 3402B-H über einen Dateneingang und 2 gepufferte Ausgänge, die zudem vom Eingang galvanisch getrennt sind.

Da die Ausgänge optisch isoliert sind, beeinflusst ein Defekt auf einer der abgehenden Leitungen nicht die Funktion der Daten auf der Steigleitung. Außerdem werden Brummschleifen vermieden, Fehlerpotentiale können nicht weitergeschliffen werden. Das ergibt eine erhöhte Betriebssicherheit.

Der 3402B-H ist DMX / RDM-kompatibel und kann mit bi-direktionalem DMX betrieben werden. Mehrere Splitter können parallel an eine Steigleitung angeschaltet werden, um die Anzahl der Ausgänge zu vervielfachen. Durch eine spezielle Logik erlaubt der 3402B-H eine sichere und schnelle RDM-Discovery.

Echte Signalauswertung
Damit Sie sicher sind, dass nicht nur ein Signal da ist, sondern es sich dabei auch um ein echtes DMX512 Daten-Signal handelt, haben wir einen Mikroprozessor zur Signalanalyse spendiert. Er prüft das Eingangssignal und gibt das Protokoll auf Status-LEDs aus.

Transparentes Device
Der DMX Splitter 3402B-H ist 100 % RDM kompatibel, tritt aber als eigener RDM-Teilnehmer nicht in Erscheinung. Daher hat auch die Menge der in einem System verbauten Splitter keinen Einfluss auf die Anzahl der zu verwaltenden RDM-Teilnehmer. Dies Verhalten bezeichnet man als “transparent”: Effektiv, aber unauffällig. Da er sich nur um die Struktur, nicht aber um den Protokollinhalt kümmern muss, haben zukünftige Inhalte des RDM-Protokolls für den 3402B-H keine Bedeutung. Er funktioniert immer.


Technische Daten DMX Splitter 3402B-H

  • 1 DMX-Universum, 2 Ausgänge
  • Kompatibilität: DMX512/1990, ANSI E1-11 DMX512A,
    DMX nach DIN56930-2, ANSI E1-20 DMX RDM
  • Klemmen onboard (Eingang und 2 opto-isolierte Ausgänge)
  • Speisung: 24V DC ca. 2,5W
  • Abmessungen: DIN rail, 2 TE

Download Handbuch DMX Splitter 3402B-H


unverbindliche PreisinformationIn den Warenkorb

DMX Splitter 3402B-H ….. 150,42 Euro
Alle Preise exklusive Mehrwertsteuer, ohne Fracht & Verpackung.

Hier können Sie sich ein maßgeschneidertes und unverbindliches Angebot von uns erstellen lassen!

[/restab]
[restab title=”ENGLISH”]

dmx booster splitter 3402b-hThe 3402B-H is a DMX splitter intended for DIN rail mount on standard 35mm rails. Simply click onto rail to install, or pull yellow release lever to unlock. The DMX splitter consists of a DMX IN data input, and two DMX OUT data outputs, which are electrically isolated in respect to the data input. Thus a defective fixture connected to one output will never affect DMX IN or DMX THRU data. This dramatically improves overall system stability and system reliability.

The 3402B-H is fully DMX RDM compatible, operates in bidirectional mode and supports E1-20 and E1-37 DMX RDM standards. Multiple splitters can be used in parallel to provide more output branches. Sophisticated microprocessor control makes the 3402B-H more reliable and faster than competing products.

True signal analysis
While the DMX splitter does not modify DMX signal contents or timing parameters, it monitors the signal and reports signal properties when allowable limites are reached. DMX RDM data traffic is displayed on stauts LEDs.

Transparent device
The 3402B-H is fully RDM compatible, but it does not appear as RDM device itself. Thus the 3402B-H does not show any RDM properties. This does neither affect the number of connected RDM devices nor RDM functionality. This behaviour is known as “transparent”: effective, inconspicious. Since the 3402B-H only cares about the standardized structure of RDM commands, and does not care about contents, on of it’s big advantages is to function absoluteley independent of signal contents. Thus future changes or amendments to RDM commands will never affect the 3402B-H: this splitter will function always.


Specifications DMX Splitter / Booster 3402B-H

  • 1 DMX UNIVERSE, 2 outputs
  • Compatibility: DMX512/1990, ANSI E1-11 DMX512A,
    DMX to DIN56930-2, ANSI E1-20 DMX RDM
  • Cage clamp connectors (Input, and 2 opto-isolated outputs)
  • Power Supply: 24V DC approx 2.5W
  • Dimensions: DIN rail, width 2U

Download manual DMX Splitter / Booster 3402B-H


Recommended retail priceAdd to shopping cart

DMX Booster 3401B-H ….. 150,42 Euro
Prices do not include VAT, transport nor packaging.

Interested in a free no obligation quote? Click here to submit your request now.

[/restab][/restabs]


Weitere DMX Booster / Splitter von SOUNDLIGHT
This way to more DMX Boosters / Splitters by SOUNDLIGHT

DMX Booster / Splitter 3401B-H

DMX Booster / Splitter 3404A-H

DMX Booster / Splitter 3404B-H

DMX Booster / Splitter 3404C-H

DMX Booster / Splitter 3406LC-H