DMX PWM LED Driver 3614PWM-H

[restabs alignment=”osc-tabs-left” responsive=”true” icon=”true” tabcolor=”#cccccc” tabheadcolor=”#ffffff” seltabcolor=”#cd2628″ tabhovercolor=”#707070″]
[restab title=”DEUTSCH” active=”active”]

dmx led driver 3614pwm-h

Der DMX LED Driver 3614PWM-H ist optimal für Schaltanlagen: 4 Hochleistungs-Steuerkanäle in nur 5 TE Installationsbreite. Bis zu 300W Leistung liefert das Modul bei 24V Versorgungsspannung.

Mit dem Interface 3614PWM-H lassen sich alle spannungsgesteuerten LED-Baugruppen bedienen, gleich welchen Fabrikats. Gemeinsames Kennzeichen: Spannungsversorgung zwischen 12 und 24V und bei mehreren angeschlossenen LEDs muss eine gemeinsame Anode vorhanden sein (gemeinsamer „+“ für alle LEDs).

Für ein augenfreundliches Verhalten sorgt die integrierte High-Speed PWM-Steuerung mit einer Frequenz von 240 Hz.  Und für den optimalen DMX-Empfang haben wir auch etwas getan: wir bestücken unsere Baugruppen mit speziellen SLR-Empfängern, die über eine erhöhte Störsicherheit und verbesserte Empfangseigenschaften verfügen. Gleichzeitig belasten sie den DMX-Bus nur mit einem Viertel der Last eines konventionellen Schaltkreises – das kommt der Performance Ihrer gesamten Anlage zugute.

Die Konfiguration der Geräte zur DIN Tragschienenmontage kann über DMX / RDM erfolgen. Die DMX Startadresse, die DMX Personality und der DMX HOLD Modus können auch mit einem Startadressboard 3000P, 3003P, 3005P oder 3006P erfolgen, das getrennt bestellt werden muss. Es ist für alle Geräte nur einmalig erforderlich und daher nicht im Lieferumfang enthalten.


Technische Daten DMX LED Driver 3614PWM-H

  • 4-Kanal
  • DMX512/1990, DMX512-A, DIN56930-2, DMX RDM
  • Betriebsspannung: 12…24VDC
  • 4 Ausgänge 0…+12(24)V, max. 8A pro Ausgang
  • Ausgänge schalten gegen GND (“Common Anode”)
  • Externer Kurzschlussschutz erforderlich
  • Abmessungen: DIN Rail, 5TE
  • ANSI E1-20 DMX RDM V1.0 kompatibel
  • 4 DMX-Personalities
  • Spannungsüberwachung, per DMX RDM auslesbar
  • augenfreundliche quasi-logarithmische Kennlinie
  • RDM Identify, Passwortschutz, HOLD-Level speicherbar
  • zahlreiche zusätzliche RDM-Funktionen

Download Handbuch DMX LED Driver 3614PWM-H


unverbindliche PreisinformationIn den Warenkorb

DMX LED Driver 3614PWM-H ….. 201,26 Euro
Alle Preise exklusive Mehrwertsteuer, ohne Fracht & Verpackung.

Hier können Sie sich ein maßgeschneidertes und unverbindliches Angebot von uns erstellen lassen!

[/restab]
[restab title=”ENGLISH”]

dmx led driver 3614pwm-hLED POWERHORSE
Best suited for installation in electrical power distribution cabinets: 4 absolute high power outputs in just 5 installation slots (width units). The decoder can supply up to 800 watts of power using a 24VDC supply. The 3614PWM-H can drive all constant voltage (CV) LED modules and LED assemblies of any type and make.

Common features are same voltage (12VDC or 24VDC will work), and common anode wiring topology (common „+“ used for all LEDs). The eye-friendly dimming results from high output frequency (244 Hz used), high output resolution (12 bit dimming), and a quasi-logarithmit output curve, which matches the human eye’s sensitivity.

Combined with excellent DMX performance thanks to special SLR receiver chips to guarantee extended noise immunity and improved signal reception, full administration and monitoring capabilities due to advanced DMX RDM technology and lots of user configuration options, the 3614PWM-H will undoubtedly be your best choice to drive CV LEDs – we’re sure!

You can configure the interface via DMX RDM. Alternatively, the DMX start address, DMX personality and DMX HOLD mode can be configured using a start address board 3000P, 3003P, 3005P or 3006P. Start address boards can be used for all of our products. They must be purchased separately.


Specifications DMX LED Driver 3614PWM-H

  • DMX PWM DRIVER for voltage controlled LEDs
  • 4-channel
  • DMX512/1990, DMX512-A, DIN56930-2, DMX RDM
  • DMX input fed-thru
  • Operating voltage: 12…24VDC
  • 4 outputs 0…+12(24)V, max. 8A per output
  • Topology: Common Anode
  • Dimensions: DIN Rail, 5 units width
  • ANSI E1-20 DMX RDM V1.0 compatible
  • 4 DMX Personalities
  • Power supply monitoring, DMX RDM readable
  • Eye-friendly quasi-logarithmic curve
  • 3 output frequencies selectable
  • Output linear or quasi-logarithmic
  • Output smoothing: 3 characteristics selectable
  • RDM Identify, Password protection, HOLD-Level
  • Slot-Labels and Device Label can be edited
  • several additional RDM functions

Download manual DMX LED Driver 3614PWM-H


Recommended retail priceAdd to shopping cart

DMX LED Driver 3614PWM-H ….. 201,26 Euro
Prices do not include VAT, transport nor packaging.

Interested in a free no obligation quote? Click here to submit your request now.

[/restab][/restabs]


Weitere DMX PWM LED Driver von SOUNDLIGHT │
This way to more DMX PWM LED Drivers by SOUNDLIGHT

DMX LED Driver 3603PWM-H

DMX LED Driver 3604PWM-H

DMX LED Driver 3613PWM-H

DMX LED Driver 3633PWM-H

DMX LED Driver 3644PWM-H